Oakwood Manor and the Wildwoods

Hi all,

I finally finished wallpapering my beautiful Oakwood Manor and I wanted to share photos of how I’ve set it up. I haven’t yet finished the curtains but that will take me months or years to get to probably so I didn’t want to wait. In my village it is home to the Wildwood Family. This is not really a story, just a little peek into their lives. 🙂

NB: I know technically this is “House on the Hill” but I prefer the name Oakwood Manor. 😉

Let’s go and visit the Wildwood Family and see what they are up to on this fine spring morning. The Wildwoods have lived in Oakwood Manor for generations.

20170702 untitled 028

Herb Wildwood is taking advantage of the gorgeous day and having a working bee in the garden. Some of the other fathers in the village have come over to help him get his garden all spruced up and shipshape. They have a great time working together. The babies adore “helping” their daddies in the garden. Herbage Dappledawn can’t figure out why his count of the carrot harvest always seems to be wrong!

20170702 untitled 034

Rusty Wildwood isn’t so sure about the garden work. He has been “getting ready” in the bathroom for a while now!

20170702 untitled 077

Baby Juniper prefers just to play in the peace and quiet of the baby’s room, right at the top of the house. She can play for hours and hours with her toys, making up the most amazing adventures as she goes. Her absolute favourite is the train set, it belonged to her granddaddy when he was little!

20170702 untitled 043

Here is the rest of the attic room. It is full of soft snoring at night-time. The siblings love sharing a room.

20170702 untitled 044

In a quick break from gardening, Herb dashed up to the laundry room on the landing to press his handkerchief. “A man should always carry a freshly pressed handkerchief” he said to himself. Ginger thinks that Herb secretly enjoys the ironing.

20170702 untitled 047

This is the main bedroom that Herb and Ginger share, and is kept as neat as a pin. The wallpaper is Ginger’s favourite part of the whole room.

20170702 untitled 074

This morning grandmother Flora is chatting with her grand-daughters in the living/dining room and listening to the wireless. Holly loves a glass of fresh orange juice with her lunch.

20170702 untitled 058

Grandfather Smokey is in the study/music room. This is his favourite spot in the whole world. He writes his letters to the newspaper at the heirloom roll-top desk, listens to his favourite records on the gramophone, and sometimes (when nobody is watching) he likes to practice his putting. Sometimes Flora will join him and sing along when he plays on the piano. See here for their love story. 😉

20170702 untitled 054

Ginger Wildwood is busy in her cosy kitchen. She loves having people over (and especially loves a tidy garden!).

20170702 untitled 072

In the afternoon Ginger brings some of her famous home-made lemonade to the garden to say thankyou to the hard workers.

20170702 untitled 037

 

x

 

Thankyou for reading. 🙂 I think Oakwood Manor is my favourite building of all time. I absolutely love the master bedroom wallpaper – it seems so daggy-Brit. 🙂

These photos were actually REALLY technically difficult for me. It was very hard to get even lighting in the rooms without dark shadows being cast, and everything I wanted in focus. I could have really used a professional flash softbox! I was just about pulling my hair out but I got there in the end!

 

Advertisements

Organising The Chaos

Hi all,

I’ve had a lovely nerdy Sunday afternoon fiddling about with my collection. Most of my collection is on display (you can see photos of my bookshelves under the “My Collection (so far)” menu option above) but there certainly does accumulate a LOT of random bits and pieces that don’t really go anywhere right now.

img_2376

The way I store all my extra bits and pieces has just evolved as it’s gotten bigger. I found these nifty containers at Bunnings, they come in a variety of sizes and configurations. Clear lids to see what’s inside…some have little internal dividers and they stack beautifully. Just perfect for the mildly OCD amongst us hehe.

img_2378

I dusted off my old labeller this afternoon and labelled them all, top and sides.

img_2377

On the lid of a divided container I can label the different sections.

img_2379img_2380

And they all store neatly away inside a cupboard out of view, on a cheapo square bookshelf (also from Bunnings!). (I haven’t got around to properly labelling the fabric cubes yet – these contain my paints and glues and other crafty items).

img_2381

I’d love to hear how you all manage the craziness of collecting? 🙂

x

A New Arrival

A special, rare character has come a long way to join life at Willowtree Gully. Stilton Bouquet!

Stilton appeared on the number 17 bus one day and took the whole village by surprise! He had heard tale of the friendly and charming village of Willowtree Gully and decided to make it his home.

Sylvanian JP Skunk Stilton
Stilton has a very friendly and laid-back nature and it didn’t take him long to make firm friends with all of the families in the gully. The only hesitant villager is Hatty Huckleberry, who reports that her over-developed sense of smell may be an issue….

For now he whiles his days away busking near the fish pond in the village square, but whispered rumours are that he wants to start up the legendary Forest Concert Band again.

Sylvanian Families JP Skunk Trombone

 

** Stilton is a rare early edition Japanese Skunk (with the white stripe down his tail). I really love him and I would looove to find the rest of Stilton’s family one day but I don’t like my chances of that so for now he’s a bachelor. You can see in this last photo the fishpond I made using AshMimi’s tutorial. Lots of fun and was my first time experimenting with resin! And my trombone which I was so happy to find too!

x

Upgrade Vegie Patch Mini-Project

***I am definitely not claiming credit for this one. I remember reading an article where someone did this and for the life of my I can’t remember who it was! If it was you or you know who please message me so I can credit them properly. ***

EDIT: I’ve found the original source of the idea (thanks to Suvenkorento): it was forum member Hgrbear and you can see her post here

When I finally got the vegie patch for Willowtree Gully I was a little disappointed… while the vegies themselves were great I felt the plasticky yellow “ground” let the set down. It didn’t even vaguely resemble soil. I remembered reading something where someone recoated their patch which gave me the idea to do this. Sorry to that person for not being able to credit them!

Original vegie patch:


First I covered the edging with sticky tape so the paint and glue wouldn’t get on to it. Then I painted it brown with a multi-surface paint (took a few coats with half an hour drying between, it wasn’t a perfect paint job but it didn’t matter).


Then I used a brush to apply PVA glue, being careful not to let it drip into the holes. Then I shook tealeaves from a teabag all over it and pressed it down. When this layer of glue was set I then brushed another layer of glue over the top to stop any bits flaking off. I’m much happier with the end result. :happy: 


I actually tried this first without painting it brown first and it looked TERRIBLE haha so I quickly washed the glue and tealeaves off before it set.

Thanks for looking. At the moment I’m liking quick little projects I can squeeze in to my life. I have big projects just waiting and no time to do them!!

x

Unboxing Japanese Nursery Set

I have a thing for babies in costumes and when I saw this gorgeous Japanese nursery set I knew I had to have it! I’m not sure if it’s rare or discontinued but it seemed difficult to track down. It eventually came up on Japan Yahoo at a reasonable price and I thought I’d just share pics of the unboxing. 🙂

It is a very gorgeous set with all the essentials the babies need for their day at nursery (bags, shoes, hats, lunch) as well as some dress up costumes and musical instruments. 


All dressed up and ready to play. 🙂 Now Willowtree Gully just needs to build a nursery for the poor tykes to attend!! (I haven’t been able to decide which nursery I want for the village so I’m stuck in analysis paralysis at the moment). 

x

Making the Secret Grotto

Hi all,

Here is a run through of how I made the diorama. Some parts I forgot to take good photos of but I’ll do my best! I got a lot of inspiration from Ashmimi’s beach tutorial for the sandy underwater part and the resin river at the top. This website Storm the Castle is lots of fun and I used the tips from their waterfall tutorial (and many related youtube tutorials) to make my waterfall (with a few adjustments as unfortunately we don’t have the same product here in Australia).

First of all I had to track down the right sort of foam. This was really difficult!! In the end I found some XPS foam insulation from Bunnings (large hardware chain). It’s a huge block (about 1.2mx0.6m) but it’s fabulous to work with for this sort of stuff. Similar foam in art shops is CRAZY expensive.

I started off by splitting it into blocks and working out how many layers I’d need to get the height I wanted.

Then I drew a rough outline of where I wanted the water to be, where I wanted the waterfall to “land” in the water.

Then I started hacking away! This would have been a heck of a lot easier with proper foam cutting hot wire tools but I just used some kitchen knives. This made it extra messy as lots of little bits of foam went everywhere. I was COVERED in foam confetti after a bout of sculpting and shaping hahaha.

At this point I had the basic shape of the diorama and glued these layers together with lots of PVA glue. This took a few days to set 100%

The next tricky item to find was a suitable water surface. I didn’t have a piece of clear Perspex/plastic that was big enough for my grotto or rigid enough to stay straight and hold itself up. I ended up finding a giant sheet of clear Perspex at Bunnings in the roofing section! This stuff was expensive for what it was but I was really getting desperate. It is actually fantastic to work with and I have heaps left over.

perspex

I used the foam cutout from my water surface to get a rough shape for my water surface.

About 5mm below the ground level of the foam I cut a groove into the foam with a sharp knife so the plastic would just slide into place as the surface of the water.

In the photo above you can see it’s getting dark – the sun is setting. I was meant to be helping with the kids’ bath and dinner! My wonderful long-suffering hubby. LOL. The perspex was coated with a thin removable plastic sheet on each side so I could mark where I wanted the swim hole and waterfall to go etc. This would just peel off later.

I then used cheap spakfilla to try and smooth the walls of the grotto and fill various defects in the foam I wanted smooth (thanks IcePixie for this awesome tip!!). I forgot to take a photo of this step but you can see the white dried spakfilla in the next photo. I also used some sandpaper to smooth the base of the foam and any areas that looked particularly hacked and messy.

I used cheap PVA glue to coat the underwater areas and sprinkled with sand. I then sprayed with watered down glue in a spray bottle to seal it and then did a couple more layers of sand. I was worried this would shed grains of sand everywhere but finishing it off with a sprayed layer of watered down PVA glue really seals it well and stops that happening. I wasn’t sure at this stage if I’d keep it sand-coloured and make the water surface blue, or paint the sand blue and keep the water surface clear (I ended up doing the second option!).

You can see the glued-on sand on the photo below. I did a rough green paint to the areas I wanted covered with grass and decided that the sand would be better painted blue (this was a nerve-wracking step after so much work already – it could have seriously messed it up!). I tried to make it a darker blue colour at the bottom to give the impression of depth, and a lighter blue as it approached the surface.

On the right of this photo you can see I’d also made a removable part for the top of the waterfall “cliff”. I wanted to keep this bit separate to the end in case I messed up the resin pour or waterfall attachment. I also painted this “river” part blue.

Here you can see the underwater part painted blue and the cliffs with their first coat of grey paint. I then brushed on watered-down PVA glue to the green areas and sprinkled with “turf” I’d bought at a craft shop. I did the same technique here I did with the sand i.e. over-spray with glue again then when that dried do another layer of glue, then turf, then a final spray of gue to seal it all.

Here is the glued-on turf drying. You can see the top part better here. I should have made my river less straight-edged. (The river was formed just by doing a shallow carve in the foam with a knife).

In the below photo I am preparing the river for a render pour. You can see I also glued a few pebbles in the river. I followed Ashmimi’s instructions in the beach tutorial for this part (and watched a few render youtube videos). (I made a little pond the day before so I could have a practice run, as it was my first time working with render).  I did some temporary hot-glue of plastic offcuts to both ends of the river so the render wouldn’t drip off. This was almost a disaster as the hot glue melted some of the foam (despite being low temp!).

You can see the finished river surface in the photo below. I was really happy with how it turned out. Render is lots of fun to play with!

The most trouble I had was finding the right material for making the waterfall and the water effects on the Perspex. All the online tutorials use an overseas silicone brand called DAP crystal clear that starts off white, is really workable (takes a while to set) but then dries crystal clear. Australia doesn’t seem to have anything like that. All the clear silicones I found were REALLY tough and set almost immediately so I couldn’t feather them to make the waterfall. And the silicones that were more workable ended up being almost white rather than see through.

The general idea was that you lay down silicone on something non-stick like greased baking paper and work it with a fork to feather it and make it look like a waterfall (how hard could it be right?!). I had to do 7 trial runs of the waterfall (using 3 different silicones from the hardware shop!!) before I found something that worked okay!!

Here is one of the trial runs. I also discovered I needed to feather vertically down rather than out as my first few looked like a Christmas tree and rather unrealistic. This particular trial stuck badly to the baking paper and I learned to spray with baking spray to stop it sticking.

waterfall

Here is the “clear” silicone. You can see I marked the length and width of waterfall I wanted before I laid it out. Man it was DIFFICULT to work with. It kept clumping up into balls and detaching from itself, it set super fast. I was pulling my hair out!! You can see it’s a lot clearer than the waterfall I ended up with but I just couldn’t get the shape right so I gave up on it eventually. Also it was reeeally difficult to detach from the underlying baking paper, no matter how much I greased it first and periodically lifted it whilst drying.

This is a trial of using the silicone on a Perspex offcut to make water effect but it was too opaque for what I wanted. I wanted the water to look really clear (i.e. to be able to see through it easily down to the underwater treasures). You can see my waterfall here was feathered wrongly, it looks odd.

testingwatereffects

So each time I learned something! It sure was frustrating though haha. In the end I had to use a more opaque silicone than I would have liked as the clearer ones were just too difficult to work with, but I think it works okay.

In terms of the water effects on the surface of the water and the river, the silicone was just not cutting it for me and I found something called Reeves Gloss Gel Medium.

Image result for reeves gloss gel medium

This is a product designed to be mixed with paints to make them more 3D but can be used on its own as a gloss. It takes a while to set but it sets clear. In the thicker parts there is a slight white-translucency to it but that works well with water. Here is some testing I did with it.

And here it is applied to the river surface to make it look like running water (before it dried clear). Whoops forgot to say I attached the silicone waterfall to the river with more silicon! Hot glue did not “stick” to the silicone.

You can see here how this dried on the river.

20170511 Sylvanian_Secret_Playhouse 027

Next I used yet more silicone to make the waves/ripples around the waterfall base and the cut-out hole for swimmers. This involved laying the silicone directly on the Perspex around these areas in rings and feathering it up and out with a greased fork. You can see my test of the Reeves Gloss Gel drying in the background and yet another failed waterfall off to the side haha.

After this I applied the Reeves Gloss Gel all over the Perspex and waited for it to dry. I probably could have done the water pattern a bit better but oh well.

And then I put it all together! I added various plants that I’d poached from cheap shops or made myself. Now it’s all ready to set up with figures and accessories. I hung a figure and a fish to the underside of the Perspex connected by clear string and a blob of hot glue (this actually looks really awesome in real life, it’s hard to see the strings and they look suspended under the water) but this will come off easily so I can change that if I want to.

Phew that was a long post haha. Well done if you’ve made it to the end and I’m sure you never want to hear about silicone ever again. I sure don’t!! :p

x Piffle